How to sharpen manicure scissors at home

The content of the article

1 What can be done
2 Video: how to sharpen nail scissors at home

Manicure is an essential companion of every self-respecting woman. He can insure in the most unforeseen situations. In this article, we will consider options for how to quickly and without much difficulty make nail scissors no less sharp than with a purchase.

When your favorite nail scissors lose their former qualities and become dull, it becomes inconvenient to use them. They no longer trim the nail as perfectly as before, and can even cause microtraumas, as if "chewing" the nail. In this case, you can either throw away the old scissors and buy new ones, or try to fix the situation yourself and grind them using improvised means.

how to wash makeup brushes

What can be done

Sandpaper is well suited for this case. It is better to choose one that has a larger grain size. Having folded the sheet in half, you can begin to cut it, while it is desirable that the blades touch the abrasive the entire length. With each movement, the scissors will become sharper. After grinding, you need to wipe this manicure tool with a damp cloth to remove microparticles left on it.

As an abrasive material, you can use ordinary aluminum foil, which is sold everywhere. Stacking it in several layers, you can start to cut into strips. If strong sharpening of the blades is required, then as many cuts as possible are necessary. After finishing work, wipe the blades.
A whetstone is perfect for this job. Its coarse-grained part is better suited to start turning when the blades are still very dull. After that, it is better to continue working with a fine-grained surface in order to finish grinding the scissors. Before starting grinding, it is necessary to disassemble a manicure tool to make it more convenient to work. To do this, just unscrew the central screw and divide it into two halves. After that, you need to put one of the blades with the inner flat side (which usually comes in contact with the other half of the scissors) on the donkey. Next, you need to choose the right angle at which you need to sharpen the blade. A dozen repetitive movements will be enough to complete the job. To understand that the tool is sharpened sharply enough, you can mark the sharp parts of the blades with a felt-tip pen before starting sharpening. If after the procedure the marks are erased, then the scissors are sharpened enough. The check can be carried out on a piece of polyethylene, if they do not crumple and easily cut, it means that the cutting edges are quite sharp.
You can use an old waste glass jar for sharpening. To do this, holding the container with one hand, open and close the scissor blades with the other, tightly pressing them to the walls of the can. Glass will make the blades sharper. After the end of grinding, you need to remember to wipe them with a damp cloth to remove the burrs.
Use a pin or needle according to the same principle as described above. By moving the metal base of the pin between the closing blades, you can add sharpness to them with just a few movements. In this case, you need to monitor the blades so as not to get hurt.
The presence of a diamond wheel will simplify the work at times. Moreover, the effect of its use persists for a long time. When working, the shape of the tool should be taken into account, since often nail scissors have semicircular blades, which requires attention to their processing. Without the skills to work with objects on the machine, it is better not to proceed with it, since you can spoil the scissors by removing too large a layer of metal. For the rounded shape of the blades, the edge of the grindstone with a radius close to the radius of curvature of the blade is ideal.

Sometimes the reason that the scissors began to cut worse is not the blunting of the blades at all, but the fact that the screw holding them has unscrewed a little, and as a result, they ceased to fit snugly together. This could cause a deterioration in their qualities. In this case, before you start sharpening the blades, you need to make sure that this is the reason for the poor operation of the scissors.

Many people do not hesitate to throw out scissors that have just become dull, but otherwise work properly. But they can be sharpened quite simply without resorting to the services of special workshops. Thus, having learned to independently return the working condition to the scissors, you can use them for a long time without buying new ones. At the same time, following the advice outlined in the article, you can return to working condition your favorite nail scissors, which are used to and which you do not want to change.

homemade face masks from rose petals