How to clean a muton coat at home

Mouton fur coat is considered to be a quality product, it is characterized by durability and practicality. If you do not violate the recommendations for the care of wardrobe items of this kind, the fur fabric will last a long time. Since the main peak of socks falls in the winter, the thing begins to get dirty, greasy, losing its former appearance. To bring the product to its original state, you must have basic knowledge regarding proper cleaning. Consider the popular methods in order.

How to clean a muton coat

Practical recommendations

  1. It is not recommended to treat the muton fur coat with pure (undiluted) acetone or vinegar essence. This recommendation applies to all fur products.
  2. In order not to expose the fur to damage and deformation, dry it away from radiators, do not act on the clothes by heat treatment (hairdryer, gas stove, oven, etc.). The ideal option is natural drying in the open air in the absence of direct ultraviolet rays.
  3. Mouton is practical, but at the same time moody material. He does not tolerate fragrances, so do not spray perfume on the surface of the product. The same applies to hair spray, the styler glues the fibers, which subsequently undergo drying and deformation. A similar recommendation is also relevant in the case of anti-moth aerosols and alcohol.

Important!
It is forbidden to wash a fur coat in a household machine, only manual processing is permissible (temperature 30–35 degrees). In this case, you can not twist the product or act on it by other mechanical methods.

How to refresh a fur coat

When the season ends, the fur coat goes to the closet for a long time. Such a move does not add freshness and attractiveness to the product. If there is no pollution, just refresh the wardrobe.

To do this, take a muton coat and shake it carefully several times to get rid of dust. You can use a carpet beater if the wardrobe is very dusty.

Next, carefully hang the thing on its shoulders, turn on the vacuum cleaner at minimum power and treat the surface. Before starting the procedure, it is important to make sure that the nozzle on the device is perfectly clean. If you neglect this advice, a statistical effect will appear, as a result of which a small dirty pile from the brush of the vacuum cleaner will go to the fur.

Effective ways to clean a mouton coat

Before you start cleaning the product, make sure that the prepared solution has a safe effect on the fur. Apply a small amount of liquid to the underside of the fur coat, wait 15 minutes, rinse and evaluate the result. If you do not notice any changes for the worse, feel free to proceed with the procedure.

Effective ways to clean a mouton coat

Semolina
The method is only suitable for white products. Prepare a vacuum cleaner with a clean brush in advance, you can use a car vacuum cleaner, it is light and compact. You will also need semolina and a deep container. Pour 1 kg into the basin. cereals, pour 8 liters of clean filtered water and wait until the grains swell. Dip the muton coat in the resulting composition, gently pat it so that the pile becomes completely wet, leave it for 20 minutes. If desired, 1 kg can be replaced. semolina 0.5 kg. corn starch, but this option is rarely used. After the expiration date, remove the item from the mixture, shake and partially dry on a flat surface. Next, vacuum, collecting excess semolina, comb with a brush for fur products.

Hydrogen peroxide
For the most part, the composition is used in the fight against yellowed areas on products of light color.Such a defect occurs due to improper drying or prolonged contact with water. A 6% solution of hydrogen peroxide or “Chlorhexidine” of the same concentration will help to clean a muton coat. Dissolve 45 ml. drug in 450 ml. purified water, pour 20 ml. ammonia or table vinegar solution. Pour a little composition into the spray bottle, evenly spray the fur coat from a distance of 35-45 cm. Make sure that the fur is evenly covered with liquid, do not spray one place several times. After applying the drug, comb the pile and leave to dry in fresh air.

Vinegar solution

For effective cleansing, you will need a 9% vinegar solution. Mix it with purified water in a ratio of 1: 3, then dip a cotton sponge into the composition and carefully treat the contaminated places. Lead only in the direction of the pile, in no case against him. Pay particular attention to the pocket zone, cuffs, collar area. After treatment with diluted vinegar, moisten a cotton cloth in clean water, wipe the fur. Hang a fur coat on your shoulders, leave to dry on the balcony or loggia. In cases where not vinegar (solution) is used, but essence, do not forget to dilute it with water in a proportion of 1:10.

Bran
To prepare the composition you need to take 120 gr. flax or oat bran, and then heat them in a pan. You can also use the oven, most importantly, do not fry the grains so that they do not burn. After the mixture is ready, spread a fur coat on the table with a white sheet. Sprinkle bran on top, immediately start rubbing into the pile. The fur should be well processed, if necessary, prepare another mixture. After all the manipulations, comb out the fur in the direction of the pile with the brush for animals, shake and hang on the shoulders. If desired, you can use a kitchen broom, the main thing is that it is perfectly clean.

It is not difficult to clean a muton coat if you have sufficient knowledge regarding recipes for preparing folk remedies. Use vinegar, bran, hydrogen peroxide or chlorhexidine, semolina. In cases where complex stains are not observed, renew the product by shaking it and vacuuming it. Dry your wardrobe only in the fresh air, avoid direct UV rays.

Video: how to clean a mouton coat

We recommend reading


leave a comment

Submit

avatar
wpDiscuz

No comments yet! We are working to fix it!

No comments yet! We are working to fix it!

Pests

the beauty

Repairs